Competition brake disc, CNC, floating, with 200mm diameter for Minarelli bolt circle, can also be mounted at the rear

Matching our 220mm brake disc, the same brake disc is now also available as a 200mm version. Many people have asked us, we have finally delivered! An oversize brake disc for the rear too! Fits perfectly in combination with our 4-piston brake caliper adapter. This means that the entire brake pad area on the rear wheel is finally used by the 4K brake caliper.

This is what it is

about a high-quality, high-end brake disc, with strict quality specifications : a very precise tolerance, a selected, hardened special alloy and a unique and well thought-out design. Optimized for best performance in all conditions.

material

The special alloy is based on well over 15 years of experience from our partner, who has developed countless brake discs for many large motorcycle manufacturers and tuning companies. It guarantees the best friction properties with minimal wear . Thanks to the special heat treatment , as used in MotoGP, the disc is perfect for very hot areas of use. For example in combination with ceramic or Z04 brake pads .

production

Unlike other manufacturers, our brake discs are not just laser cut, ground and finished, but each individual brake disc is cut out of the above-mentioned material and then elaborately CNC machined from both sides. Through CNC machining we guarantee the highest precision for maximum service life and function. Especially in the area of ​​floaters, a high level of precision is required, which cannot be achieved with a laser. The numerous depressions, which are intended to drain water, dust and dirt from the friction surface and at the same time serve as a wear indicator, would not be possible without CNC machining.

Floaters

As mentioned above, this is the first truly floating brake disc without a carrier disc. The brake disc is connected to the wheel hub in a sufficiently centered manner via the three floaters using countersunk screws. Between the floater and the brake disc there is a multi-wave spring washer and a shim, which gives the brake disc a certain working area in order to be able to adapt perfectly to the pads. The “ floating effect ” can theoretically be increased or reduced by shims of different thicknesses.

The floaters themselves are available in four different versions. For M8 or M10 screws, as well as titanium (black coated) or aluminum (orange anodized). The alloys used both come from aerospace and are known for their high strength and low weight.

Suitable for Minarelli recording:
-Diameter: 200mm
-Inner diameter: 58mm
-3 hole M8/M10 (selectable)
-Installation direction: Front Left / Right / Rear in combination with our 4K brake caliper adapter
-Comes with special M10 countersunk head fine thread screws
-Weight: 399g